介孔钯-硼合金纳米颗粒的制备和甲醇氧化电催化性能北大核心CSCD

合金化可以调节贵金属纳米材料的物理化学性质,从而显著提升它们的电催化性能。尽管合金化在过去的20多年里已取得诸多成果,但是如何充分发挥纳米合金的组分优势仍需深入的探究。本研究通过一步溶液相合成法实现了类金属硼(B)合金化的钯基介孔纳米催化剂材料的合成,同时探究了B原子的组分优势和介孔形貌的结构优势在碱性介质中电化学甲醇氧化反应(MOR)的协同作用。最优PdCuB介孔纳米催化剂表现出优异的电化学MOR活性和稳定性。机理研究表明,优异的催化活性源于B原子在Pd基介孔纳米催化剂中的积极协同作用;该协同作用通过电子效应(改变Pd的表面电子结构从而减弱CO基中间体的吸附)和双功能效应(促进OH_(2)的吸附从而氧化CO基中间体)在动力学上加速了有毒CO基中间体的去除(提高甲醇氧化的决速步骤)。同时,B原子的间隙插入和介孔结构抑制了物理奥斯特瓦尔德(Ostwald)熟化过程,显著增加了催化剂的稳定性。     

A review of recent advances in catalytic combustion of VOCs on perovskite-type catalysts

Along with the rapid development of industry, VOCs gradually move into the spotlight, and now become a kind of harmful environmental pollutants that cannot be overlooked. This paper introduces the hazards of VOCs and the common catalytic combustion catalysts, noble metal catalysts and non-noble metal catalysts, for the elimination of VOCs. Perovskite catalysts, as one of the non-noble catalysts, play an important role in the field of catalytic combustion in recent years. According to the classification of elements doping in perovskites, the research achievements in the past five years were analyzed and reviewed. In addition, this paper also analyzes and elaborates the reaction kinetics and QSAR/QSPR models for the introduction of structural properties and reaction mechanisms.     

Catalytic activity of nanocrystalline ZnM2O4 (M = Fe,Co) prepared via simple and facile synthesis of thermal decomposition of mixed metal complexes of Schiff bases generated from α-ketobutyric acid and diaminoguanidine

Metal complexes ([ML₂], where M = Fe, Co, or Zn; HL = 2-[(6-ethyl-5-oxo-4,5-dihydro-2H-[1,2,4]triazin-3-ylidene)-hydrazono]-butyric acid, C₉H₁₃N₅O₃) of a Schiff base derived from α-ketobutyric acid (α-KBA) and diaminoguanidine (Damgu) were synthesized and characterized using elemental, spectral, and thermal studies. The metal complexes exhibited similar decomposition behavior, with a highly exothermic final decomposition step resulting in the formation of metal oxides. Isomorphism among the complexes was revealed using a powder X-ray diffraction (PXRD) technique. Solid solution precursors ([Zn_1/3M_2/3(L)₂], where M = Fe, Co) were synthesized and characterized using various physico-chemical techniques. A thermal decomposition technique was used to prepare spinel-type zinc cobaltite (ZnCo₂O₄) and zinc ferrite (ZnFe₂O₄) nanocrystalline particles with the synthesized single source precursors. Structural studies using PXRD ascertained the predominant crystal phase to be spinel. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) showed a mean nanoparticle size of 18 ± 2 nm. Magnetic measurements revealed a weak magnetic behavior in the synthesized spinels. In the aqueous phase, the spinels exhibited catalytic activity, reducing 4-nitrophenol (4-NP) in the presence of NaBH₄ at room temperature. Additionally, the study demonstrated that the catalyst can be recovered and reused for five cycles with a more than 85% conversion efficiency.     

Insight into room-temperature catalytic oxidation of NO by CrO2(110): A DFT study

The first-principles DFT calculations together with microkinetic analysis reveal the complex catalytic mechanism of low-content NO oxidation on CrO₂(110) at room temperature. It quantitatively makes clear that CrO₂(110) can exhibit considerable activity with the Mars-van-Krevelen mechanism preferred, and the nitrate species serves as the key poisoning species.     

Sonication-Assisted Synthesis of Bimetallic Hg/Pd Alloy Nanoparticles for Catalytic Reduction of Nitrophenol and its Derivatives

In this article, we report a facile approach for the synthesis of an inexpensive catalyst of bimetallic Hg/Pd alloys comprising nanoparticles with various structures using a unique ultrasonic reaction that is conducted without the use of any reducing agent. The nanoparticles of Hg/Pd alloys (HgPd and Hg₂Pd₅) were achieved for the first time by sonicating an aqueous solution of Palladium (II) nitrate with metallic liquid mercury, as evidenced by XRD. EDS further confirmed the presence of Pd and Hg elements in the alloy. The surface morphology and structure of the nanoparticles have been systematically investigated by HRSEM, HRTEM and SAED pattern. In order to explore the catalytic activity of the as-synthesized nanoalloys, the catalytic reduction of 4-nitrophenol and a few other nitrophenol derivatives were investigated. Excellent catalytic activity was obtained for Hg/Pd (1:1) alloy, and the rate constant for the reduction of 4-NP with Hg/Pd at room temperature was found to be 58.4 × 10⁻³ s⁻¹, which is possibly the highest ever reported. The catalyst exhibited superior stability and reusability when compared with those reported in the literature for other catalysts based on noble metals.     

Bioactive constituents of Iris hybrida (Iridaceae): Processing effect

Iris genus plants are a valuable source of bioactive compounds, which are an important component for pharmaceutical development. The present article shows the potential for mineral nutrition with application of magnesium sulfate, iron chelates and potassium oxide affecting the phenolic compound contents in Iris hybrida ‘Tsikavynka’, I. hybrida ‘Tambo’ and I. hybridа ‘Widecombe Fire’. The effect of mineral processing was specific to plant organs and varied in the component composition. The Iris rhizomes had an increased total phenolic compound content after treatment (up to 10% of the total isoflavonoid content, up to 8% of phenolic acids, up to 5% of γ-pyrones and up to 13% of flavonoids), determined using UV–vis spectroscopy. A positive effect of nutrition on the biosynthesis and content of individual isoflavonoids (tectoridin, nigricin d -glucoside, genistin, iristectorigenin B, nigricin, irigenin and irisolidone) and xanthone mangiferin in Iris rhizomes by HPLC was established. In addition, an increase in the chlorogenic acid amount in Iris leaves was noted. The results demonstrate the sensitivity of Iris phenylpropanoid metabolism to mineral nutrition and can be used to predict medical plant cultivation with increased content of bioactive constituents.     

Prospects for the combination of mechanochemistry and flow applied to catalytic transformations

The urge of developing modern alternatives regarding industrial production has led to the creation of novel techniques that help overcome critical disadvantages from traditional batch mechanochemistry. One promising strategy includes the merging of flow processes with mechanochemistry. Two technologies are herein highlighted: twin-screw extrusion (TSE) and Impact (induction) in Continuous flow HEated Mechanochemistry (I-CHEM) allowing not only the industrial production of polymers but also active pharmaceutical ingredients, synthesis of (nano)materials, and the obtention of high-added value products from biomass and wastes valorization.     

Characterizing the protonation states of the catalytic residues in apo and substrate-bound human T-cell leukemia virus type 1 protease

Human T-cell leukemia virus type 1 (HTLV-1) protease is an attractive target when developing inhibitors to treat HTLV-1 associated diseases. To study the catalytic mechanism and design novel HTLV-1 protease inhibitors, the protonation states of the two catalytic aspartic acid residues must be determined. Free energy simulations have been conducted to study the proton transfer reaction between the catalytic residues of HTLV-1 protease using a combined quantum mechanical and molecular mechanical (QM/MM) molecular dynamics simulation. The free energy profiles for the reaction in the apo-enzyme and in an enzyme – substrate complex have been obtained. In the apo-enzyme, the two catalytic residues are chemically equivalent and are expected to be both unprotonated. Upon substrate binding, the catalytic residues of HTLV-1 protease evolve to a singly protonated state, in which the OD1 of Asp32 is protonated and forms a hydrogen bond with the OD1 of Asp32′, which is unprotonated. The HTLV-1 protease–substrate complex structure obtained from this simulation can serve as the Michaelis complex structure for further mechanistic studies of HTLV-1 protease while providing a receptor structure with the correct protonation states for the active site residues toward the design of novel HTLV-1 protease inhibitors through virtual screening.     

Molybdenum-catalyzed reduction of molecular dinitrogen into ammonia under ambient reaction conditions

Synthesis of transition metal–dinitrogen complexes and stoichiometric transformations of their coordinated dinitrogen into ammonia and hydrazine have so far been well investigated in order to achieve a novel nitrogen fixation under ambient conditions. As an extension of our study, the dimolybdenum–dinitrogen complex bearing PNP pincer ligands has been found to work as an effective catalyst for the formation of ammonia from dinitrogen, where 52 equiv of ammonia are produced based on the catalyst (26 equiv of ammonia are produced based on the molybdenum atom of the catalyst). This is the most effective catalytic reaction system for the formation of ammonia from molecular dinitrogen catalyzed by transition metal–dinitrogen complexes as catalysts under ambient reaction conditions. Herein, we describe recent results concerning the catalytic reaction, including the proposed reaction pathway.     

紫外分光光度法测定硫酸中的氮氧化物

建立了使用紫外分光光度法测定硫酸中氮氧化物的方法。利用高锰酸钾将试样中的亚硝酸根氧化成硝酸根,然后在硫酸(30%)介质中,于210nm波长处定量测定试样中氮氧化物的含量。方法检出限为0.0000075%,线性相关系数(r)为0.999 0,平均加标回收率为97.2%~102.8%,平均相对标准偏差(RSD,n=6)为2.9%~3.1%。方法灵敏度高、检出限低,操作简便、成本低,可应用于蓄电池电解液中氮氧化合物的检测。